Club50-60
Générer une cible

Le site vit des dons de ses membres, sans aucune contrepartie.

Annexe B — Guide de sélection des patchs et écouvillons

Appendix B — Patch Selection and Jag Guide

Choisir la bonne taille de patch est essentiel pour un nettoyage efficace. Le patch doit être assez serré pour sentir une résistance, mais pas au point de faire fléchir la baguette. Ces recommandations sont basées sur des jags pierce-style et des patchs en flanelle de coton double-nappé.

Sélection de patchs par calibre

CalibreTaille du patchNotes
.22 Rimfire29 mm carré (1-1/8'')
.224 Centerfire35 mm carré (1-3/8'')29 mm pour jags Dewey/Bore Tech
6 mm (.243)45 mm carré (1-3/4'')Piquer décentré au premier passage peut aider
6,5 mm (.264)50 mm rond ou 57 mm carré
7 mm (.284)50 mm rond
.30 cal (.308)45 à 57 mm carréVarie selon le fabricant du jag
.338 cal57 mm carré

Dimensions des écouvillons à pointe (jags)

Type de jagDiamètreLongueur
.22 cal Sinclair4,19 mm (0,165'')68,3 mm
.22 cal Dewey4,65 mm (0,183'')68,3 mm
6 mm Sinclair4,52 mm (0,178'')68,1 mm
.270 cal Sinclair5,64 mm (0,222'')67,6 mm
.30 cal Sinclair6,35 mm (0,250'')68,1 mm
.30 cal Bore Tech6,45 mm (0,254'')58,7 mm
.338 cal Dewey7,37 mm (0,290'')78,2 mm
This is the text of the original English treatise, The Art of the Precision Rifle. It uses imperial units (grains, inches, fps, °F, psi); the French version of this page uses metric units. Figures drawn by LaTeX appear in the complete PDF edition.

Selecting the correct patch size is critical for effective cleaning. A patch should be tight enough to feel resistance but not so tight that the cleaning rod flexes significantly.

Patch Selection by Caliber

The following recommendations are based on using pierce-style jags and double-napped cotton flannel patches. The correct patch size should feel firm when pushed through the bore—tight enough to provide good contact with the rifling, but not so tight that the cleaning rod flexes significantly.

Recommended Patch Sizes by Caliber
Caliber Patch Size Notes
.22 Rimfire 1-1/8” square
.224 Centerfire 1-3/8” square 1-1/8” for Dewey/Bore Tech jags
6mm (.243) 1-3/4” square May need off-center stab for first pass
6.5mm (.264) 2” round or 2-1/4” square
7mm (.284) 2” round
.30 cal (.308) 1-3/4” to 2-1/4” square Varies with jag manufacturer
.338 cal 2-1/4” square

Jag Measurements

Standard Jag Dimensions
Jag Type Diameter Length
.22 cal Sinclair 0.165” 2.69”
.22 cal Dewey 0.183” 2.69”
6mm Sinclair 0.178” 2.68”
.270 cal Sinclair 0.222” 2.66”
.30 cal Sinclair 0.250” 2.68”
.30 cal Bore Tech 0.254” 2.31”
.338 cal Dewey 0.290” 3.08”